Wulf Mods ARI Hot Knife

Cut Concentrates Like Butter

Improve your sessions by making cutting, loading, and moving your concentrated materials easier than ever before with the power of our Wulf Mods Ari Hot Knife! These excellent dabbing accessories run off of a 400mAh battery, have a dial adjusted temperature range of 1.8 – 4.2v, and even features at 10s preheat function for the thickest of materials.On top of this, the Ari Hot Knife actually doubles as a fully functional concentrate pen thanks to its 510 threaded connection and removable hot knife tip. With all of this excellent power, the Ari Hot Knife is the perfect all in one device to bring out on all of your oil and concentrate adventures! Check out the 9 available colors and get started with your own Air Hot Knife today!

Using Your Ari Hot Knife

To begin using your Ari Hot Knife first turn it on by pressing the power button 5 times in quick succession. Once on, you can hold down the power button to warm your ceramic knife tip and use it to easily scoop and move your concentrates. When finished, turn the Ari Hot Knife off the same way as before by pressing the power button 5 times again.

Attaching A Cartridge To Your Ari Hot Knife

To use your Ari Hot Knife in cartridge mode first unscrew the ceramic tip and place it somewhere safe. After this, choose your desired 510 threaded cartridge and attach it to the top of the Ari. From here you can hold down the power button as normal and inhale from your mouthpiece to enjoy the Ari Hot Knife as a vaporizer.

Adjusting The Ari Hot Knife ’s Temperature

To change the temperature on your Ari Hot Knife make use of the dial on the base of the device and slowly rotate it to the voltage you desire.

Pre-Heating Your Ari Hot Knife

To preheat your Ari Hot Knife press the power button twice (2x) in a row, this will start a 10s countdown where your ceramic tip is slowly warmed to make it even more effective at dealing with colder or denser concentrated materials.

How To Charge The Ari Hot Knife

To keep your Ari Hot Knife powered up make use of the USB-C charging port. The first time you charge your Ari Hot Knife, leave it plugged in for a full 2 hours. Every time after this initial charge, never leave your device plugged in for longer than 1 hour at a time. This is to preserve battery life and protect you from other potential issues.

Troubleshooting Your Ari Hot Knife

Take a look at the following troubleshooting errors that can arise with your Ari Hot Knife.Low Battery Warning – When you attempt to use the Ari with a low battery, your device will flash its lights 10x in a row and power off. This means you need to charge the device.Short Circuit Warning – If the Air flashes a red light 5x and stops working, this is to let you know the device is experiencing a short circuit and you should immediately stop using it until the warning no longer appears.Open Circuit Warning – If you see a white light flash 3x, this is to inform you of an open circuit warning and indicates you need to replace the cartridge.

How To Clean the Ari Hot Knife

To keep your Ari Hot Knife clean first power it down and then wipe down the exterior with a soft cloth to remove any dirt or material build up.After this remove the ceramic tip and make use of a q-tip or swab dipped in isopropyl alcohol to gently clean it as well as the 510 threaded port. Always leave ample time for parts to dry before continuing to use the Ari Hot Knife after you’ve cleaned it.What’s Included:

• Wulf Mods ARI Hot Knife

WARNING: Do not charge with a power bank of 5V or higher. Do not charge in your car. Do not overcharge the battery. Failure to follow these instructions could result in battery damage and frying of the internal system.